Metal Supply FAQs in DFW
Whether you are a contractor pricing out lintels for a brick job, a homeowner buying a couple of posts for a fence, or a fabricator tracking down hard-to-find sizes, the questions below cover what builders and tradesmen near McKinney, TX most often ask before placing a steel order. The answers reflect how Vitz Metals operates from its Anna, TX yard just north of McKinney, with delivery across the Dallas-Fort Worth (DFW) metro and direct shipping nationwide.
Where is Vitz Metals located?
Vitz Metals operates out of Anna, TX, just north of McKinney on Highway 75 in the North Dallas area. The yard and storefront are open for in-person pickup during business hours, with parking and loading space for both small consumer purchases and larger contractor trucks. The Anna location keeps the business close to the heart of the Dallas-Fort Worth metro while providing easier access for builders and tradesmen working across Collin County, North Dallas, and the broader DFW area. If you are coming from Plano, Frisco, McKinney, Allen, or further south in Dallas, the drive up Highway 75 is straightforward. Walk-ins are welcome with or without an appointment.
What are your hours and do I need an appointment?
Vitz Metals is open Monday through Friday from 8:00 AM to 5:00 PM and Saturday from 8:00 AM to noon, closed Sundays. No appointment is needed; walk-ins are welcome during business hours. If you are coming for a large or unusual order, calling ahead at 972-838-4455 helps ensure the product is staged and ready when you arrive, especially for cut-to-length work or full-truck loads. For McKinney and DFW contractors planning a job site delivery, scheduling by phone gives the team time to confirm stock and route a truck. Saturday mornings tend to be busiest with weekend project shoppers, so weekday mornings are often the quickest turnaround. You can see our latest hours here.
How long has Vitz Metals been in business?
Vitz Metals has been in business for over a decade, supplying builders, contractors, masons, tradesmen, ranchers, and homeowners across the Dallas-Fort Worth metro and beyond. The business is family-owned and operated by Andy Vitz, which means the same person responsible for stocking the right products and pricing them fairly is often the one answering the phone. Many DFW contractors have used Vitz Metals as their preferred steel supplier for years, returning for repeat angle iron, lintel, purlin, and rebar orders because the prices and service stay consistent. Longevity in the steel supply business comes from honoring quotes, delivering on time, and standing behind the product, which is how the company has built its base of regular contractor customers.
What areas does Vitz Metals serve?
Vitz Metals primarily serves the entire Dallas-Fort Worth metroplex from the Anna, TX yard, with delivery available within roughly a 100-mile radius. That covers McKinney, Plano, Frisco, Allen, Sherman, Denton, Dallas, Fort Worth, Arlington, Garland, Mesquite, and most surrounding cities. Trucks have delivered beyond the 100-mile mark for the right project, so call to discuss longer hauls. For customers outside Texas or working on out-of-state projects, direct shipping is available anywhere in the continental U.S. via freight carriers. Whether you are a contractor running multiple DFW job sites, a homeowner picking up a single piece of angle iron, or a fabricator shipping a custom order to another state, Vitz Metals can usually accommodate the request.
Does Vitz Metals deliver to job sites?
Yes, Vitz Metals delivers to job sites within approximately a 100-mile radius of the Anna, TX yard, which covers most of the Dallas-Fort Worth metro. Minimum delivery order is generally $300, though that figure is flexible depending on the location and the customer relationship. Deliveries can drop directly at the active job site, which saves contractors the time and fuel of self-loading and shuttling material from the yard. Trucks accommodate a range of products, from bundled angle iron and full-length purlins to oversized I-beams and rebar bundles. Scheduling is easiest when you call ahead and confirm the route. For repeat contractor customers running multiple DFW projects, the team can often coordinate recurring drops on a regular cadence.
Can Vitz Metals ship to other states?
Yes, Vitz Metals offers direct shipment of steel and metal products anywhere in the continental U.S. through freight carriers. This is useful for customers building or fabricating outside the Dallas-Fort Worth area, contractors with out-of-state projects, or specialty buyers who can’t find a particular size locally. Common shipped products include angle iron, lintels, square tubing, purlins, expanded metal mesh, diamond plate, and custom-cut pieces. Shipping costs depend on weight, dimensions, distance, and carrier, so call 972-838-4455 with the destination zip code and product list for an accurate quote. For larger orders, direct freight often beats local-supplier prices in other states, especially when bulk pricing makes the math work in your favor.
How do I get a price quote?
Call 972-838-4455 to get a current price on any product. Steel commodity prices, especially for rebar, used pipe, and culverts, fluctuate with market conditions, so listed prices can go stale quickly. The team will walk through your project, recommend the right product and size, and quote you on the spot or within the same business day for larger or custom orders. Free consultations are available for builders and contractors planning a project budget, and most calls come back with both a recommended product and a competitive price. McKinney and DFW contractors often use these conversations to compare specs, identify lower-cost alternatives that achieve the same goal, and lock in pricing before placing an order.
Are Vitz Metals’ prices competitive?
Yes, pricing at Vitz Metals is described as just over wholesale, which keeps margins tight enough that many DFW contractors report it as the best price in the area, especially for angle iron, lintels, and used steel pipe. The Anna, TX overhead is lower than that of national chains running heavy advertising budgets, and those savings are passed through to customers. Bulk and contractor orders frequently get additional pricing breaks. For a one-piece homeowner purchase or a multi-pallet contractor order, calling for a current price is the fastest way to compare against another quote. Many repeat customers cite price-plus-service as the reason they keep coming back, even when other suppliers are physically closer to their job site.
Do you offer bulk or contractor discounts?
Yes, bulk and volume discounts are available across multiple product lines, including used steel pipe, culverts, rebar, purlins, and angle iron. The exact break depends on the product, current market pricing, and order size, so the best approach is to call 972-838-4455 with your full quantity and have the team quote it as a package. DFW contractors running multiple jobs can often establish ongoing pricing arrangements, especially for repeat-order products like angle iron lintels and rebar. For one-off large orders, even a single pallet or full-bundle purchase tends to unlock better per-unit pricing than smaller piecemeal buys. The same flexibility applies whether you are pulling material for a McKinney custom home build or a large commercial job in Dallas.
What steel products does Vitz Metals carry?
Vitz Metals stocks a broad range of steel and metal products for residential, commercial, industrial, and ornamental use. Core inventory includes angle iron and steel lintels, steel pipe (new and used), steel square tubing, steel purlins (C and Z), steel I-beams, steel channel, rebar, expanded metal mesh, diamond plate and sheet metal, culvert pipe, steel cable wire, and steel flat bar. Most products come in standard sizes plus custom-cut options. Galvanized and primer-coated finishes are available for many products. Stainless steel and aluminum options are stocked or can be special-ordered. If a product or size is not on the floor in Anna, TX, the team can typically special-order and have it in within a short turnaround for DFW pickup or delivery.
Can Vitz Metals cut metal to custom sizes?
Yes, custom cutting is available on most products, including angle iron, square tubing, channel, flat bar, and sheet metal. Cuts are made in the Anna, TX shop using shop-grade equipment that produces clean, accurate ends ready for welding or installation. Custom lengths help DFW contractors avoid waste, reduce on-site cutting time, and arrive at a job site with material already sized for the install. For lintels, holes can be pre-drilled in stock pieces if needed for the project. Tolerance and lead time depend on the product and order size; simple cuts on in-stock material are usually same-day, while large custom-cut bundles may need a day or two of advance notice.
What sizes of angle iron do you carry?
Angle iron stock at Vitz Metals ranges from 1/2 inch (1/2 x 1/2 x 1/8) up to 8 inch (8 x 8 x 1), in standard mill lengths plus custom cut-to-size options. Available finishes include hot-dip galvanized, primer-coated, and bare steel, so you can match the application and exposure conditions. Cuts can be made with or without pre-drilled holes for direct mounting. Many DFW masons and brick contractors use the smaller-to-mid sizes as standard lintels above doors and windows, while structural and fabrication shops use the heavier 4-inch through 8-inch sizes. If a specific size is not on the floor in Anna, TX, the team can usually special-order it quickly. Call 972-838-4455 to confirm current stock and pricing.
What are steel lintels used for and how do I choose the right one?
Steel lintels (typically angle iron) support brickwork or stonework above wall openings like doors and windows, transferring the load above the opening down into the wall on either side. Choosing the right lintel involves four factors: define the wall construction type (internal partition versus exterior cavity wall), measure the clear span and add bearing length on each side (typically 6 inches or 150mm), determine the load that needs to be supported (masonry weight plus any roof or floor load above), and use a load span table to confirm the lintel size matches the load capacity needed. Many McKinney and DFW masons stop by Vitz Metals with a clear span and elevation; the team helps select the right size from in-stock inventory.
What types of steel purlins do you carry?
Vitz Metals stocks both C purlins and Z purlins in red-oxide finish across a range of common sizes. Stocked sizes include 4 x 2, 6 x 2, and 8 x 2.5 in 14 gauge 40 ksi (in 20, 25, and 30-foot lengths), plus 4 x 2.5, 6 x 2.5, and 8 x 2.5 in 14 gauge 55 ksi (in 15, 20, 25, and 30-foot lengths depending on size). Eave struts are also available. Purlins are common for metal building roof systems, pole barns, agricultural buildings, and commercial structures across the DFW area. If you need a non-standard length or a different gauge, the team can special-order to spec. Delivery is available throughout the McKinney and Dallas-Fort Worth metro, with direct shipping for out-of-area projects.
What is the difference between a C purlin and a Z purlin?
C purlins (also called Cee purlins) have two equal-sized flanges in a C shape and are end-butted for continuous spans. They are lighter and best suited for walls and floors. Z purlins (Zee or Zed purlins) have one flange wider than the other in a Z shape, which lets adjacent purlins lap and bolt together at the supports for greater rigidity and stronger continuous load capacity. That makes Z purlins the standard choice for roof framing on metal buildings and pole barns. For most residential and small commercial projects in the McKinney and DFW area, the choice comes down to whether the purlin is a roof member (typically Z) or a wall or floor member (typically C). Both are stocked at the Anna yard.
What steel pipe sizes does Vitz carry?
Steel pipe at Vitz Metals ranges from 1/2 inch in diameter up to nearly 4 feet, with wall thicknesses available in nearly any practical specification. New pipe stock includes 2 3/8 schedule 40 in 32-foot lengths, popular for fencing across DFW ranches and residential properties. Used 2 3/8 and 2 7/8 oilfield pipe is also stocked, brushed and cleaned with no plastic liners, and ready for cutting and welding. Larger diameter pipe is commonly used for fence posts, flagpoles, sign poles, bridge railings, construction pilings, columns, and trailer fabrication. Pipe pricing fluctuates with the steel market, so call 972-838-4455 for current pricing and availability before planning a budget. Bulk discounts are available for large orders, especially used pipe.
Does Vitz Metals sell used steel pipe?
Yes, Vitz Metals stocks used 2 3/8 and 2 7/8 oilfield steel pipe at significant savings versus new pipe. Each piece is brushed, cleaned, and free of plastic liners. There may be cosmetic flaws on the exterior from prior use, but the structural quality is intact and the pipe cuts and welds well. Used pipe is widely used by DFW ranchers and contractors for fencing, livestock corrals, gates, welded fabrication projects, and even custom furniture builds. Beyond the cost savings, used pipe is an eco-friendly choice that reduces the energy and natural resources needed to produce equivalent new steel. Bulk discounts apply, and delivery to job sites within roughly 100 miles of Anna, TX is available. Call for current pricing since the market shifts.
What grades of steel square tubing do you carry?
Steel square tubing at Vitz Metals comes in A513 or A500 Grade B depending on size. Stainless steel, aluminum, iron, and carbon steel square tubing are also available for projects requiring specific properties. Stocked sizes range from 3/4 x 1-1/2 inch up to 2 x 4 inch in various wall thicknesses and lengths, with custom cuts available in the shop. Square tubing is used across DFW for structural support in machinery, bridges, truck beds, trailers, ornamental fencing, gate frames, and general fabrication. Properly maintained uncoated steel tubing typically lasts a minimum of 25 to 35 years. If you need a specific size or wall thickness not on the floor, the team can special-order to spec for McKinney and Dallas pickup or delivery.
What kind of steel I-beams and channel does Vitz carry?
Vitz Metals stocks structural steel I-beams in a variety of sizes, including wide-flange shapes (the most common, with nearly parallel flanges), American Standard shapes, and H-piles for pile foundations. If a specific size is not on the floor in Anna, TX, the team can order it for DFW pickup or shipping nationwide. Steel channel inventory is A36 hot-rolled mild structural channel, stocked in 2, 4, 6, 8, 10, and 20-foot lengths, with custom cuts available. Both C channel and box channel are stocked in thicknesses from 0.003 to 0.150 inches. Channel is widely used for frame work, cross members, braces, supports, transportation equipment, and industrial maintenance. Call 972-838-4455 for current sizes in stock and competitive pricing for McKinney and Dallas-area projects.
Where can I buy rebar in Dallas (DFW)?
Vitz Metals sells rebar at competitive prices from the Anna, TX yard, located just north of McKinney on Highway 75, with delivery available throughout the Dallas-Fort Worth metro within roughly a 100-mile radius. Rebar is used for reinforcing concrete in residential foundations, commercial buildings, roadways, and industrial slabs. Pricing fluctuates with the broader steel market, so a quick call to 972-838-4455 confirms current pricing. Volume and bulk discounts are available, and free consultations help homeowners and contractors budget rebar tonnage for upcoming pours. Out-of-state shipping is also available for projects outside Texas. McKinney and Dallas customers often combine a rebar order with other products on the same delivery to make the truck run more cost-effective.
What is diamond plate steel used for?
Diamond plate steel (sometimes called tread plate or checker plate) is a rigid sheet with raised diamond-shaped lines running at 90-degree angles to provide slip resistance and added rigidity. Common uses across the DFW area include decks, ramps, walkways, catwalks, stair treads, platforms, dock and running boards, truck compartments, tool storage box lids, trailer floors, and industrial floors and conveyors. Material options include stainless steel, aluminum, and various carbon steel grades. Diamond plate is cold-formable, easy to weld, and highly resistant to corrosion and chemicals when finished appropriately. On-site fabrication is available at the Anna shop for cutting and forming to spec. Standard sheet sizes and thicknesses are stocked, with custom orders available for unusual dimensions.
Does Vitz Metals sell expanded metal mesh?
Yes, expanded metal mesh is stocked in a variety of sheet sizes, opening sizes, and gauges. Expanded metal is made by slitting and stretching a sheet of steel to create diamond-shaped openings, producing a lightweight, strong material that allows air circulation and visibility. DFW customers use it for smokers and BBQ grills, security and screening fencing, retail shelving and partitions, ceiling tiles, signage, sifting screens, machinery guards, walkways, window protection, and trailer side panels. Heavy load-bearing expanded steel grating is available for industrial applications. Finished-frame edge options are available for projects that require clean perimeters. If a specific opening size or gauge is not on the floor in Anna, TX, the team can special-order to fit your application.
Does Vitz Metals sell culverts?
Yes, Vitz Metals stocks metal culvert pipe in diameters typically ranging from 12 inches up to 48 inches, in standard lengths of 20, 24, and 30 feet. Culverts are used to channel water under driveways, roads, and across drainage areas while standing up to dirt and gravel cover plus load-bearing vehicle traffic. Only high-quality culvert pipe is stocked; nothing scrapped or seconds. Pricing fluctuates with the steel market, so call 972-838-4455 for current pricing and stock. Bulk discounts apply for larger orders, which is common for ranches and developers across the DFW metro. Delivery within roughly 100 miles of Anna, TX is available depending on order size; larger culverts often require special handling at the delivery site.
How long does steel square tubing last?
With proper installation and reasonable maintenance, uncoated steel square tubing typically lasts a minimum of 25 to 35 years. Lifespan depends heavily on the operating environment: tubing exposed to weather, salt, or corrosive chemicals will degrade faster than tubing in dry, sheltered, or indoor applications. Galvanized or primed finishes extend life significantly by slowing oxidation. Across the McKinney and DFW area, hot summers and humid spring weather make periodic inspection worthwhile for outdoor applications like ornamental fencing, gates, and trailer frames. Touching up paint or galvanized coatings before rust gets a foothold dramatically extends service life. For high-corrosion applications, stainless steel square tubing is a longer-lasting alternative that is also stocked or can be special-ordered.
What metals can be welded?
Steel is the easiest and most common metal to weld, with carbon steel being the cheapest and most widely used welding material across DFW fabrication shops. Stainless steel also welds well, with slightly higher difficulty and cost but greater durability and corrosion resistance. Aluminum can be welded but is more challenging because of its softness, low melting point, and tendency to burn through quickly without careful technique. Copper is weldable but requires significantly higher heat than steel, which makes it slower and more demanding. For most McKinney and DFW projects, the right welding choice comes down to matching the metal to the structural and aesthetic requirements, then selecting an appropriate filler material. Vitz Metals stocks weldable steel, stainless, and aluminum options in many sizes.
Why choose Vitz Metals over a national metal supplier?
National metal supply chains run heavy advertising and overhead, both of which get baked into the price you pay. Vitz Metals keeps overhead low and passes those savings through, which is why many DFW contractors report finding the best lintel and angle iron prices in the area at the Anna, TX yard. Beyond pricing, you get personal service from a small family-owned operation; the same people taking your call are usually the ones loading your truck or routing the delivery. Industry knowledge from a decade-plus in the steel business helps you choose the right product and size rather than over-buying. Same-day pickup is available on in-stock items, and DFW deliveries can usually be scheduled within a short window.
What should I expect from a good metal supplier?
A reliable metal supplier should deliver four things consistently: timely logistics with accurate measurements and on-schedule deliveries, a diverse and well-stocked inventory across the most-needed steel and metal products, fast and clear responses to phone calls and quote requests, and knowledgeable customer service that understands not just what is in stock but what product fits your specific application. Across the McKinney and DFW area, finding all four in one supplier is genuinely rare, especially among national chains where contractor calls often go to a generic call center. Family-owned operations like Vitz Metals tend to deliver on these criteria because reputation matters more than ad spend, and repeat contractor business is the lifeblood of the company. When evaluating any supplier, ask about response time, delivery reliability, and bulk pricing flexibility.